B2 Four Gear Square Tube Constant Temperature Shower Head Set Home Bathroom Pressurized Bath Copper Nozzle

1. Smooth curves, light body, details highlight the taste
2. The principle of hydroelectric power generation, the water flows through the built-in micro-vortex generator in the shower to generate electricity, and the LED display is lit, the display is waterproof, no need to plug in, just turn on the water outlet switch, and the water temperature will be displayed in real time
3. Oversized top spray, full body shower
4. Air pressurization technology, like being in the rain, saves water
5. Healthy silicone water hole, soft and easy to clean, no clogging
6. Liquid silicone outlet hole, soft and durable, super fine and dense water outlet while preventing clogging, easy to rub to discharge small impurities caused by poor water quality, excellent rebound type, so that the nozzle is not easy to deform
7. 3 modes: water column mode, rain mode, booster
8. The main body has an ultra-wide table design, which is hard and bright, and the stains are not easy to adhere to the horizontal main body surface, which can be used to place toiletries
9. The soft water outlet can be rotated freely in 360 degrees, and the water flow direction can be adjusted at will by pressing the button lightly. It is convenient and quick to take water with water
10. One key to switch the water outlet, the operation is clear at a glance
11. There is no need to consider the water volume and instability of the water heater, and there is no need to repeatedly adjust the temperature. Once the temperature is set, the temperature will be constant throughout the process, giving more care to the family
12. The whole copper main body is integrally formed, and the inner wall is smooth and seamless, with uniform wall thickness, strong compression resistance and durability through ingenuity and precision die-casting process
13. High-pressure water sprayer, lightly press the spray gun to realize two-in-one washing and washing, powerful water discharge, bid farewell to housework chores, decontamination and cleaning are easily done
14. Hot and cold models: manual adjustment according to demand
15. Constant temperature model: safe 38 degrees Celsius temperature lock protection
16. Nominal pressure: national standard
17. Function: spray, rain

Shower installation
1. When installing a thermostatic shower, facing the water inlet, it must be hot on the left and cool on the right. If the waterway in your home is opposite, you need to contact customer service for instructions
2. The standard decorative cover of the shower has a thickness of 2cm, a curved foot of 4 minutes to 6 minutes, and a length of 4.7cm. It is recommended that the water pipe be recessed into the wall by about 1cm. It cannot be installed due to reservation problems, and you need to purchase a decorative cover for installation
3. If the water inlet spacing is between 13.5-16.5cm (standard 15cm), if it exceeds the range, you need to buy widened curved feet
4. The distance between the water inlet and the ground is recommended to be 90-110cm
5. It is recommended to use a water pressure of 0.2MPA-0.6MPA for the digital display shower head. If the water pressure is lower than this, the LED digital display may not display normally. Reminder: When the sprinkler function is used, the water temperature will not be displayed